Pegasus Astro Falcon Rotator For Cheap

Pegasus Astro Falcon Rotator

Pegasus Astro – Falcon Rotator is a light-weighted, low profile camera field rotator. Do not be fooled by its thin size! It can lift and handle heavy image trains – dead accurate! Very easy to operate via ASCOM drivers or standalone software will make your life easier to automatically adjust with precision your camera field.

• Low profile / M54 threaded.
• Thickness of the rotator is 18 mm / 0.7-inch.
• Weight is 700 grams.
• Both openings of the rotator are M54 threaded.
• Adapters for both sides (included).
• Pegasus Astro provides two different adapters for both sides:
• Telescope Side: M54 male to 2-inch Nosepiece.
• Camera Side: M54 male to M48 male Adapter.

Precise rotation

A powerful geared / low backlash stepper motor ensures that the rotator will lock to the designated degrees. Mechanics inside the focuser guarantee zero flex in any point during a full circle rotation.

Rated load

Falcon Rotator has been tested at 6 Kg (13.2-pounds) of imaging setup. The 6 stainless steel branded bearings can easily handle higher payloads with zero flexure.

ASCOM & INDI Support

Rotator is fully ASCOM6 supported. INDI support.

Standalone Software

Control the Falcon Rotator from the supplied standalone Windows software.

Image of the Windows screenshot. 

Specifications:

• Physical Size: 180 mm x 140 mm x 56 mm.
• Material: Blue Anodised Aluminium.
• Clear Aperture: 54 mm (2.13-inches).
• Steps per degree: 87.2 steps per degree (31.392 steps per full revolution).
• Payload: 6 Kg (13.2-pounds).
• Telescope Adapter: M54 male to 2-inch Nosepiece (included).
• Camera Adapter: M54 Male to M48 Male Adapter.
• Back Focus: 18 mm (0.7-inch).
• Weight: 0.7 Kg (1.54-pounds).
• Connectivity: USB 2.0.
• Operating Power: 12V / 1Amp.

 

• The Falcon Rotator is a light-weighted, low-profile camera field-rotator.
• It is easy to operate via ASCOM drivers or standalone Windows software.
• Both openings of the rotator are M54 threaded, and there are two supplied adapters for both sides.
• The stepper motor ensures that the rotator will lock to the designated degree. It tested at 6 Kg (13.2-pounds) of imaging setup, but can handle more with zero flexture.

 

• Falcon Rotator.
• M54 male to 2-inch Nosepiece.
• M54 Male to M48 Male Adapter.
• USB Type B cable (1.8 m length).
• Cigarette lighter adapter to 2.1 mm plug.

Also:

• ASCOM drivers, Stand-alone Windows software.